Technical.

Technical Info

 

Technical Information
Fabrics
Pattern Repeat, Product Width and Pattern Alignment
Pattern repeats and product widths are accurate to +/- 5%. when making multiple width curtains please ensure that pattern alignment is adequate to produce a satisfactory result prior to cutting.

Check for Flaws
Once received please examine fabric for any flaws. Check pattern,  colourway and quantity . Once received please examine fabric in its entirety for any flaws. Report any flaws or faults immediately, please take photos as this will speed the process up.NEVER  cut the fabric until completely sure it is acceptable: Check pattern,  colourway and quantity . Any discrepancy must be notified within 48 hours of receipt if possible .  must be notified within 48 hours of receipt if possible . In any event, no consideration will be given to defects not reported within 28 days. We regret that once cloth has been cut the relevant manufacturer will decline  to replace or refund any faulty fabric.  We regret that once cloth has been cut we cannot accept returns.

Multiple Width Products
A fabric is not completely stable, it is always possible that the pattern will not be completely square on the cloth. whilst every effort is made to avoid distortion, a commercial tolerance is to be expected
Shrinkage, Atmospheric Conditions...
The possibility of +/-  5% shrinkage or relaxation should always be taken into account when making curtains, blinds, loose covers etc. Movements of curtains in situ: atmospheric conditions vary and we cannot accept responsibility for movement . Generally curtains should hang away from the glass to avoid possible soiling and deterioration caused by condensation.
Fabric used as Drapes, Light Exposure
When held against the light fabrics cannot be guaranteed to be free of visible flaws.
Eventually most dyes fade on exposure to light, the main cause being sunlight,  colour failure can occur rapidly on exposed areas such as the leading edge. To reduce natural fading, curtains should always be lined with a good quality light proof lining. Artificial light can also cause fading.  Some colours, particularly pastel colours are particularly sensitive to light.
Upholstery fabrics should be kept out of direct sunlight.
Suitability for Drapes and Blinds
Certain fabrics such as Harlequins Akina, Kira and Kana and Clarke & Clarke Crescendo are bonded or pocket weaves and have a complex construction.  Two layers of fabric woven simultaneously and joined with the chenille/cotton yarn to create the design of the fabric.  This technique gives a slightly quilted and or rippled look to finished curtains or blinds which is a characteristic of the construction and should be taken into account.
Inherent characteristics of Certain Fabrics
Silk Fabrics are natural products and need to be protected from the harmful effects of the sun.  Due to the delicate nature nature of the fibre, silk fabrics should be kept out of strong direct sunlight and curtains and blinds should be lined or interlined.  Glass magnifies the destructive elements of sun-rays and winter sun is as harmful as summer sun. Impurities in the air may also cause as much fading as sun. Colour can also fade or alter from oxidation, this being the process where moisture in the atmosphere reacts with certain materials causing discolouration.  Oxidation can also occur if silk is stored in an area of poor circulation. No claims can be accepted for the fading of silk fabrics.
The inherent handwriting of this natural fibre is characterised by slubs and natural weave irregularities ( Slubs, Nubs and Ladders ) which enhance the total appearance -  this is not a defect.
Faux Silks are produced to replicate the appearance of real silk and imperfections and irregularities are an intentional characteristc and are not classed as flaws.
Linen and Linen Unions have a tendency to crease which can be evident in curtains and blinds. Care should be taken when handling to minimise this
Voiles and Sheers,.. fully joining the widths is not recommended, only at the heading. Removing the white selvedge may be necessary to maintain the sheer appearance of the drape.
When choosing your fabric and wallpaper it is the clients responsibility to ensure that the product is suitable for their needs and requirements. We can accept no responsibility for our customers choice of product.
WALLPAPERS
Wallpapers are generally supplied in rolls approx. 10.05 metres long but please check individual designs before ordering.
In the event of a wallpaper complaint, a sample of the imperfection and a roll label MUST be submitted for each roll claimed.  NO claim will be allowed for any wallcovering hung in excess of one roll. If a problem is encountered, DO NOT continue to hang or cut the goods. The seller cannot be held responsible for any labour charges or consequential losses incurred. The user MUST accept responsibility once work has commenced.  Ensure that all rolls of wallcovering are examined prior to application for batch number, design, colour and inperfections.
In the event of a claim being agreed, at our discretion,  either the client will receive a replacement roll of wallpaper for each roll deemed to be faulty or a credit note to the same value will be issued ( any credit note issued will be valued for three months after the date of issue ). Where the goods have been accepted by the client, in the unlikely event of a suitable replacement not being found, at our discretion a refund may be made but this will incure an administration fee of 25% of the value of the wallcovering.
Colour Match
Slight variances may occur between batches.
Dark Ground Wallpapers
In certain circumstances, you may wish to consider colouring the edges with a water soluble crayon before hanging. For more information contact our Customer Services.

 

 


 

Info

 

12 Huron Close
Heath Hayes, Cannock, Staffordshire. WS11 7YL

www.shadesinteriors.co.uk

 

01543275426